EnClean^® Single Use Brush is an ENFit^® specific cleaning brush for Medical Facilities only.

• Due to the complex design of the ENFit® Connector, cleaning and removal of nutritional formula from the ENFit is more difficult and the risk of biological contamination could increase.
• Conventional cleaning methods (cottons balls, cotton swabs, wipes, toothbrushes and Interdental brushes) are less effective since most can not make contact with the difficult internal ENFit geometries, Such as the bottom moat and the undersides of the internal screw threads.
• Of particular concern is the accumulation of biofilm producing organisms on the underside surfaces of the internal screw threads.  Visual inspection will not be able to detect this hidden potential source of contamination.
• The EnClean Single Use Brush is designed to fit between, over and under the internal ENFit threads and clean all the way to the bottom moat area of the EnFit Connector. It removes debris and thoroughly cleans the internal threads of the EnFit Connector.  
• It is superior to Interdental brushes due to it’s 1mm thick stainless steel brush head.  This is much stiffer and can thus scrap away internal debris that would cause an Interdental brush to bend and fail.
• EnClean Single Use Brushes were specifically designed for the medical facilities (Hospitals, NICU’s, PICU’s, etc.) where only disposable single use devices are permitted by policy and practice.
• We recommend that the medical practitioner occlude the ENFit feeding lumen during the cleaning process to minimize the risk of bio-loaded debris from entering the feeding lumen.
• EnClean Single Use Brushes can be purchased in boxes containing 10 packs each containing 100 brushes for a total box capacity of 1000 brushes.